Bravo XL Cold Plunge Tub + Chiller Bundle

All of our cold plunges and saunas come with a 2-year manufacturer warranty, with the option to extend to 5 years for an additional fee. For more information see our Warranty Page.

Titan chillers are engineered to deliver powerful cooling performance while maintaining sound levels appropriate for home and wellness environments. Below is an overview of typical noise levels you can expect from each model during normal operation (measured approximately at 3ft):

• Standard — 1/3 HP Model
This entry-level chiller operates at a relatively low noise level, comparable to a household refrigerator, around 40–45 dB. This makes it unobtrusive in most residential or wellness spaces.

• Pro — 1/2 HP Model
With greater cooling power comes a modest increase in sound output. The 1/2 HP Pro unit generally runs in the ~50–55 dB range, similar to a dishwasher running, and is still comfortable for indoor or outdoor use.

• Pro+ — 1 HP Model
The high-performance 1 HP chiller produces more airflow and compressor sound due to its stronger cooling capacity, typically around ~50–60 dB, comparable to an average household air conditioner or quiet conversation.

These noise levels are generally well suited for residential spaces, garages, patios, or wellness rooms. Actual perceived sound can vary based on placement, surface, and ambient conditions; using vibration-absorbing pads and placing the unit slightly away from seating or sleeping areas can further reduce perceived noise.

 Titan Wellness is located at 7456 Orangewood Ave, Garden Grove, CA 92841.

• Logistics and distribution center
• Dedicated product showroom

You are welcome to visit us and experience our products in person.

Cold plunges provide more consistent and full-body exposure compared to cold showers, often resulting in a stronger physiological response.

For most users, sessions between 2 and 10 minutes are effective. Beginners should start with shorter durations and increase gradually.

Titan systems are designed to reach temperatures as low as approximately 37°F (3°C), a range widely associated with maximizing cold exposure benefits.

For beginners:

• Start around 55–60°F
• Limit sessions to about 1 minute
• Gradually increase duration
• Slowly reduce temperature

As tolerance improves, users often progress toward colder settings.

Cold water immersion is widely used as a recovery and wellness practice. Commonly reported benefits include:

• Reduced muscle soreness and inflammation
• Faster post-workout recovery
• Improved circulation and vascular response
• Enhanced energy and alertness
• Support for mental resilience and stress adaptation
• Potential mood enhancement through endorphin release
• Support for nervous system regulation
• May assist with sleep quality for some users
• General wellness and performance optimization

Many athletes, fitness enthusiasts, and wellness practitioners incorporate cold plunging into their recovery, resilience, and daily performance routines.

Titan tubs accommodate a wide range of users, including individuals up to 7′2″ tall. Larger models such as the Triumph XL and Apex are recommended for taller users.

Routine maintenance ensures optimal performance:

• Clean or replace filters as needed
• Maintain water sanitation levels

Helpful accessories:

• Replacement filters:
https://titan-wellness.com/products/chiller-filter

• Epsom Salt Soak: https://titan-wellness.com/products/cold-plunge-therapy-epsom-salt-soak

Yes. Titan chillers are designed with universal compatibility in mind and can integrate with virtually any third-party or DIY tub setup.

• Fixed Connector Configuration – The Universal Cold Plunge Chiller connects directly to tubs equipped with standard inlet/outlet fittings.

• Drop-In Configuration – The Universal Bathtub Chiller operates without fixed connectors by using a drop-in circulation system.

This flexibility allows you to upgrade your cooling system without replacing your existing tub.

Titan chillers include advanced water maintenance features:

• 20-micron water filtration (standard)
• Optional UV sanitation system

These systems help maintain water clarity and hygiene for extended periods.

Titan chillers are engineered with energy efficiency in mind. The system cycles on and off automatically to maintain your set water temperature rather than running continuously.

Typical operating costs are modest. Under normal residential conditions, most users can expect an estimated electricity cost of approximately:

• Roughly $0.30 – $1.20 per day

Actual consumption varies depending on factors such as ambient temperature, usage patterns, insulation, and target water temperature.

Compared to the ongoing expense of purchasing ice, a chiller is generally far more cost-effective and predictable over time.

No special wiring or electrical upgrades are required. Titan chillers operate on a standard US 110V outlet, allowing for simple plug-and-play setup in typical residential environments.

Yes. Titan Cold Plunge tubs are engineered for both indoor and outdoor use.

• Weather and UV resistant construction
• Insulated military-grade Drop-Stitch PVC tub
• Powerful chiller performance across climates

The system is designed to maintain stable temperatures even in extreme heat or cold.

Orders ship from California with free, fast delivery across the United States and Canada. Typical transit times range from 2–5 business days depending on destination. Expedited shipping options are available at an additional cost.

Yes. We offer 12-Month 0% APR Financing, making cold plunge therapy more accessible.

Titan Wellness offers a 30-Day Easy Return policy for added peace of mind.

All Titan Wellness products are priced competitively due to our highly efficient business and manufacturing model:

1. In-House Manufacturing
   We manage the entire production process internally, from material sourcing to assembly. This eliminates multiple layers of third-party markups.
2. Economies of Scale
   Large-volume production reduces per-unit costs, allowing us to pass those savings directly to customers.
3. Optimized Processes
   Continuous investment in manufacturing efficiency and technology enables consistent quality at lower operational costs.
4. Direct-to-Consumer Model
   By selling directly, we avoid distributor and retailer margins, ensuring better value for customers.

In short, our pricing reflects operational efficiency rather than reduced product quality.